IFR101B  TDS    PDF format

Brief description

Brief description

       
      ZHUOAN  macromolecular intumescent flame retardant,which is exclusively used for fireproof coating, is compounded by common chemical raw materials,such as,acid resource,carbon resource,and gas resource.During producing,you just need to add a little additive,besides,it is environmental protection.

Mainly features

      The advantages of IFR 101A

NO.	catalogue	classic system	IFR 101A
1	Material	three raw materials,such as,ammonium polyphosphate, pentaerythritol and melamine	A single component.So it can effectively save time and manpower.
2	Balling mill time	Because of three different fineness of raw materials,it needs 60-100 minutes to achieve uniform mixing.It is higher power consumption	About 400 mesh in all,which can greatly reduce the milling time (only needs 25-40 minutes), saving energy and reducing resource costs.
3	Adding amount	40-50%	26-35%
4	Product Performance	Many types materials,so it is not stable enough, and will migrate the durability.	Single component, high molecular weight, good compatibility with the substrate, good durability, excellent flame retardant effect, stable performance, which can ensure the fireproof performance is less affected by the flame retardant.
5	The product cost	The price is slightly lower, but the additive amount is large, so the cost of coating increased, more milling time , more power consumption.	Slight higher for price , but the amount far less, so the entire coating can be flat or lower; Milling time is short,energy savings is slight.

 

       Comparison foaming times and additive amount with classic system

 

Foaming times	Additive amount（KG） (IFR101A）	Additive amount（KG） (Classic system )
10 times	260	380
20 times	350	500
30 times	400	600

Application

        As an raw of material,it is suitable for all kinds of solvent-based fire-retardant coating(ultra-thin steel fire-retardant coating, thin steel fire-retardant coating, electric cable fire retardant coating, etc),and PP / PE plastic flame retardant

Specification

No.	Inspection item	Technical requirements
1	moisture	≤0.5%
2	fineness	≥95%
3	bulk density	≤0.8 g/ml
4	nitrogen（N）	≥11%
5	phosphorus（P）	≥9.8%

 

PACKAGE&SHIPPING      

woven PE bag, 25kg / bag, 18bags/pallet

Attention:12 months minimum at 25℃(77℉). Subject to re-inspection thereafter. Store in dry,shaded conditions away from sources of heat and ignition.